Product ID:EC-3524 PART B
MSDS Date:04/24/1987
FSC:8030
NIIN:01-046-2947
Kit Part:Y
MSDS Number: BHYKZ

3M

3M CENTER
ST. PAUL, MN 55144-1000
US

Emergency Phone: 612-733-1110

Info Phone: 612-733-1110

Cage: 76381

MINNESOTA MINING AND MFG CO, DBA 3M

SAINT PAUL, MN 55144-1000 US

Telephone: 866-556 5712 / 612-733-1110

Cage: 76381

GLASS BUBBLES

Fraction By Weight: 20.-30%.

EPICHLOROHYDRIN/BISPHENOL (A EPOXY RESIN BLEND AND

Fraction By Weight: 70-80%

ANTIMONY TRIOXIDE (SARA III)

CAS: 1309-64-4

RTECS: CC5650000

Fraction By Weight: 1.-10%.

OSHA PEL 0.5 MG/M3 (SB)

ACGIH TLV: 0.5 MG SB/M3; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:EYE CONTACT: IRRITATING TO THE EYES
UPON DIRECT CONTACT. SYMPTOMS MAY INCLUDE EDEMA, REDNESS, TEARING,
BURNING SENSATION AND BLURRED VISION. SKIN CONTACT: ACUTE EXPOSURE
IS MILDLY IRRITATING. PROLONGE D OR REPEATED CONTACT WILL PRODUCE
DEFATTING AND RESULTANT DERMATITIS. ALLERGIC SKIN REACTION IN
SUSCEPTILE INDIVIDUALS.
Effects of Overexposure:NK HEALT HAZARD DATA CONT: INHALATION: DURING
CURING OPERATIONS, VAPORS MAY BEIRRITATING TO THE RESPIRATORY
SYSTEM. INGESTION: MAY CAUSE DIGESTIVE SWYSTEM IRRITATION.
Medical Cond Aggravated by Exposure:NK
NK

First Aid:EYE: FLUSH EYES WITH LARGE AMOUNTS OF WATER FOR 10 MIN. GET
MED ATTN. SKIN: THROROUGHLY WASH AFFECTED AREA WITH SOAP AND WATER.
INYHALATION: PROVIDE FRESH AIR GET MED ATTN. IF SWALLOWED: DRINK
TWO GLA SSES OF MILK OR WATER. CALL A PHYSICIANOR POISON CONTROL
CENTER.

Flash Point Method:CC
Flash Point:>200F / 93C
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:CO2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:FIRE FIGHTERS SHOULD BE EQUIPPED WITH SCBA
WHEN FIGHTING FIRES INVOLVING THIS MATERIAL.
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:OBSERVE PRECAUTIONS IN ALL SECTIONS. COLLECT
SPILLED MATERIAL AND CLEANUP RESIDUE USING ABSORBENT MATERIAL AS
NEEDED. PLACE IN DOT APPROVED METAL CONTAINER AND SEAL.

Handling and Storage Precautions:USE ONLY IN AREAS WITH SUFFICIENT
VENTILATION TO PREVENT VAPOR BUILDUP. AVBOID BREATHING VAPORS.
CURING OVENS MUST BE VENTED TO THE OUTDOORS.
Other Precautions:AVOID EYE CONTACT WITH OR BREATHING DUST FROM
GRINDING/CUTTING/SANDING OPERATIONS ON THE CURED MATERIAL.

Ventilation:ADEQUATE VENTILATION TO PREVENT VAPOR BUILDUP
Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:SAFETY GLASSES
Work Hygienic Practices:WASH HANDS THOROUGHLY BEFORE EATING OR SMOKING.
Supplemental Safety and Health
REMOVE CONTAMINATED CLOTHING AND LAUNDER BEFORE REUSE. KEEP CONTAINER
CLOSED WHEN NOT IN USE. KEEPOUT OF THE REACH OF CHILDREN.

Boiling Pt:B.P. Text:NA
Vapor Pres:NA
Vapor Density:NA
Spec Gravity:0.62
pH:NA
Evaporation Rate & Reference:NA
Solubility in Water:VERY SLIGHT
Appearance and Odor:PASTE

Stability Indicator/Materials to Avoid:YES
NK
Stability Condition to Avoid:NA
Hazardous Decomposition Products:CO, CO2 AND BROMINE DECOMPOSITION
PRODUCTS WHEN SUBJECTED TO EXCESSIVE HEAT OR FLAME
Conditions to Avoid Polymerization:MAY NOT OCCUR

Waste Disposal Methods:TWO-PART SYSTEM: COMBINE PARTS A AND B AND ALLOW
TO FULLY CURE. COMPLETELY CURED MATERIAL MAY BE PLACED IN A
SANITARY LANDFILL IAW APPLICABLE REGULATIONS AND AUTHORITIES.
OTHERWISE INCINERATE PART B RESIDUE IAW LOCAL REGULATIONS AND
AUTHORITIES

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.